Fibreglass Hardening and Solvent Products

We carry every product that you require for a fibreglass project, from the epoxy resin through to the hardeners, solvents and safety equipment. If you are uncertain which product will suit your application best, or you would like more information on the mixing ratios, please don’t hesitate to ask one of our members of staff – we are always happy to point you in the right direction.

If you are after a specific hardener, acetone or solvent product, contact Ace Fibreglass Supplies on 07 5493 9974 to speak to one of our friendly staff members. If we don’t have the product in stock, we can look at ordering it in for you.

Fibreglass Resin Hardeners

When you are using epoxy resins, you will also need to use a hardener. There are a number of different mix ratios for the epoxy resin, and they relate to the amount of hardener that is used in the resin – the proportions must never be changed or this will have an adverse effect on the end result.

The only way to change the cure time of the resin mix is by using a different hardener. Some epoxy hardeners have a cure time embedded in their product code, for example:

  • 510 = Series 500 epoxy, 10 minute hardening time
  • 520 = Series 500 epoxy, 20 minute hardening time
  • 530 = Series 500 epoxy, 30 minute hardening time

NOT SURE WHAT IS THE RIGHT PRODUCT FOR YOUR PROJECT?

Ring Ace Fibreglass Supplies to speak to one of our experienced and knowledgeable staff members about fibreglass hardeners and solvents – we are always happy help you out.

CALL NOW »